The standard model AS can effectively be operated by the windmills to a depth of 50m and comprises of a rod, piston with one ring and 500mm cylinder.
The AS series is available in 50, 60, 70, 80, 100, 130, 150, and 180mm diameter. The 180mm is manufactured only on demand.
Click here for the assembly instructions.
The Deep Borehole Cylinder Model ASRD is suitable for boreholes to a depth of 200m and comprises of a rod, piston with two rings and 600mm cylinder with a built-in rod support.
The AS-RDS series is available in 50, 60, 70 and 80mm sizes.
Click here for the assembly instructions.
JOOSTE force cylinders are used for surface pumping and is capable of delivering water to a height of 250m and over a distance in excess of 5km. It comprises a force head with packing, cylinder 600mm, piston with two rings and rod and suitable valves.
The Force Cylinder is manufactured in 5 sizes namely 50, 60, 70, 80 and 100mm.
Click here for the assembly instructions.
The Jooste Force Head is applied to prevent water from discharging from the top of the column of pipes when pumping with a windmill thus delivering water higher than the surface. The packing is specially designed for durability, to last longer and minimise adjustment.
Click here for the assembly instructions.
The JOOSTE hand pump is a revolutionary breakthrough, designed to operate much lighter than any other on the market. It is a relatively short stroke, spring loaded hand pump for rapid operation. With its adjustable leaverage and equiped with a forcehead, it is designed to lift water as high as 10m above the surface from a depth of 50m deep boreholes.
Click here for more about the hand pump.
The JOOSTE ball valve is an award winning patent designed to control water levels and provide substancially more water under very low pressures. This makes it extremely suitable for cattle drinking troughs. The unique design uses the water pressure to close and therefore also operates very effectively under high pressures if required.
Click here for the assembly options.
The groove of the plunger set accommodates a specially designed polyurethane ring to seal off water positively between the plunger and the cylinder wall. This unique design has a low frictional coefficient while maintaining a secure seal.
FOOT VALVES
The JOOSTE foot valve is the inlet valve of the cylinder and is fitted at the bottom of the cylinder.
ACETAL ADAPTER
An adapter manufactured from acetal can be fitted to the bottom of the cylinder to accommodate a submersible or extension pipes.
To prevent the rod from damaging the cylinder when accidently dropped. Standard fitting in deep well cylinders.
RUST RETAINER
Are attached to prevent rust accumulating on the piston.
PIPE PROTECTORS
The pipe protectors are fitted onto the rods in the riser pipes and prevent the rods from grating against the pipes, a must for every borehole.
CHECK VALVES
The JOOSTE check valve comprises a threaded acetal body a polyurethane valve and stainless steel spring. the check valve is very effective as a non-return valve in a pipeline or as an extra foot valve.
STROKE ADJUSTER
The Jooste stroke adjuster facilitates the task to adjust the stroke and can be installed between the galvanised rods and the wooden rod of the windmill.
STAINLESS STEEL PIPES & RODS
Stainless steel pipes and rods can extend the life of the pumping plant by years of faultless operation. An excellent investment for your water supply! Save on the frequent removal of pipes.
SAUSAGE MAKING MACHINE
Very effective hand operated machine with double handle, rack and pinion. Ideal for home use.
